No boot disk has been detected or the disk has failed

If when you kick your Windows 11/ten computer and you receive the No kick disk has been detected or the disk has failed error message, then this post may aid you. In this postal service, nosotros will identify some potential known causes that can trigger the mistake and and then provide the possible solutions you can try to help remediate this event.

This error occurs because during the boot process, the system checks the HDD/SSD for boot information and other Operating Organization information then as to use the information to kicking upward the system. However, if the computer is unable to recall whatsoever boot information or the OS details on the drive, the error message is displayed on the screen.

You might come across this error message due to one or more (merely non limited to) of the following known causes:

Incorrect boot social club settings.
Missing operating organisation from the HDD.
Hard Disk failure.
Loose hd connection to PC.
Corrupt Boot Configuration Data (BCD).

No boot deejay has been detected or the disk has failed

If you lot're faced with this No boot disk has been detected or the disk has failed outcome, y'all can try our recommended solutions below in no item order and see if that helps to resolve the outcome.

Check the PC-to-HDD/SSD cable connection
Check the PC's boot priority
Cheque if the HDD/SSD is failing
Run Automatic Repair
Run CHKDSK and SFC
Rebuild BCD & Repair MBR.

Let's take a look at the description of the process involved in relation to each of the listed solutions.

ane] Check the PC-to-HDD/SSD cablevision connection

The cables connecting the HDD/SSD to the computer and vice versa might have been unfastened which can requite rising to the No kicking disk has been detected or the disk has failed mistake message.

Follow these steps to bank check the connections and gear up the problem:

Note: You may crave the services of a calculator hardware technician.

Power off your computer and remove the battery.
Open up your reckoner'south casing later on.
Detach the HDD from your computer.
Make clean all the ports and wirings linking the HDD to the computer and vice versa.
Now, reconnect the HDD to the figurer. (Ensure that all the connections are fastened tightly).
Lastly, adhere the battery and power up your figurer.

Check to meet if the outcome persists. If so continue with the adjacent solution.

2] Check the PC's boot priority

You may be receiving the No boot deejay has been detected or the disk has failed error message on boot because your figurer is trying to boot from some other source and failing to find whatever boot data instead of booting from the kicking disk. If that's the instance, all you need to practice in social club to resolve this trouble is to ensure that the boot disk is at the tiptop of your calculator's boot gild.

If this doesn't resolve the consequence, try the next solution.

3] Check if the HDD/SSD is failing

Another reason for the computer's inability to kicking up is because the HDD/SSD is in a failed country which triggers the No boot deejay has been detected or the deejay has failed error bulletin.

You can detach the bulldoze from your PC and connect information technology to some other PC to admission the files and folders on the PC and so as to check if the drive is accessible. If y'all are unable to access the contents of the drive, you definitely need a replacement.

Alternatively, you can check the bulldoze's Due south.Chiliad.A.R.T. condition.

Nearly modernistic drives take a feature called S.K.A.R.T. (Self-Monitoring, Analysis, and Reporting Engineering) that monitors different drive attributes in an attempt to observe a failing deejay. That way, your estimator will automatically notify y'all before data loss occurs and the drive tin be replaced while information technology all the same remains functional.

In Windows, yous can manually bank check the S.M.A.R.T. status of your drives from the Control Prompt. Here's how:

Press Windows fundamental + R.

In the Run dialog box, type cmd and hit Enter to launch Control Prompt.

In the control prompt window, copy and paste the command below and hit Enter.

wmic diskdrive get model,status

It will return "Caution" or "Pred Fail" if your drive is failing or has already failed, or "OK" if the drive'southward wellness is fine.

If the consequence shows the bulldoze is failing, it's recommended you lot back upwards your data and supercede the drive.

iv] Run Automated Repair/Startup Repair

You can besides gear up the No kicking disk has been detected or the deejay has failed issue by performing Automatic Startup Repair on your system by using Windows bootable installation DVD.

Here's how:

Insert Windows bootable installation DVD and restart your PC afterward.
Press any central to kick from CD or DVD when prompted to keep.
Select your language preferences, and click Next.
Click Repair your computer in the bottom-left.
In the Choose an option screen, click Troubleshoot > Advanced option > Automatic Repair or Startup Repair.
Wait for the Windows Automatic/Startup Repairs to be complete.
Restart your PC.

If the issue is nevertheless not resolved, keep with the next solution.

5] Run CHKDSK and SFC

In this solution, utilizing CHKDSK and SFC to repair the disk could help resolve the issue.

Do the post-obit:

Repeat the steps in Solution 4 in a higher place to enter the Advanced Startup Options list.

Then, choose Command Prompt option.

In the command prompt window, blazon the control below and hit Enter.

sfc /scannow /offbootdir=c:\ /offwindir=c:\windows chkdsk c: /r

When the operation completes, exit command prompt and restart the PC.

If the outcome is still not resolved, proceed with the adjacent solution.

6] Rebuild BCD & Repair MBR

Provided that the kick sector is damaged or corrupted, the No boot disk has been detected or the disk has failed mistake will occur. In this example, you need to rebuild the Kicking Configuration Information file and repair the Principal Boot Record file and see if that resolves the consequence. If not, yous can move to the adjacent solution.

Hopefully one of these solutions will fix the result for you!